Our rear entry pontoon boat ladder of 4 step is sturdy and well-made, the telescopic steps work easily and stow compactly.

The hand holds are nice and make getting all the way out of the water much easier than ladders without them.

Withstand 400lbs capacity.

How to Install:

Choose the most suitable side of your transom platform for mounting the ladder.

When mounting, locate a place where the ladder will not interfere with the turning of the motor or be near the propeller of your craft.

Position the mounting bracket with the ladder in the area to be attached.

Mark the bracket’s eight mounting holes onto the deck surface.

Drill the eight marked holes with a suitable drill bit.

(Use M8*40 Self-Tapping Screw to fix L-Shaped Plate to your platform；

Fix Handrail to L-Shaped Plate with Round-Head Bolts, and then fix the front end of Handrail to the platform with M6*40 Self-Tapping Screw.

Finally use Nuts and Hexagon Bolts to fix The Steps to Handrail. And cover PP Caps onto both the head of Nuts & Hexagon Bolts.)

NOTE:

It is recommended to through-bolt this ladder for a secure installation

Mount the ladder in place by holding bracket up to platform and inserting mounting screws. Secure ladder in place with fasteners (not provided, as installations vary).