[1 - Pack]

[2 - Pack]

[6 - Pack]

Gorilla® Contact Adhesive Ultimate is an incredibly strong, permanent contact adhesive that resists heat and moisture. Our formula has an aggressive tack that can be used on a variety of materials and surfaces, both indoors and out. The adjustable anti-clog nozzle is easy to use, and offers 3 ways to spray the desired web pattern. BONDS: Heavy Duty Fabric, Car Headliners, Foam, Rubber, Felt, Cork, Ceramics, Laminate, Leather, Metal, Plastics, Wood, Canvas & More!

Directions: All surfaces should be clean and free of dirt, grease, and oil. Protect surrounding area from overspray to avoid residual adhesive.
1. Shake can well before use.
2. Adjust spray pattern width by turning spray tip to desired setting.
3. Hold can in a vertical position 6-8 inches away from surfaces to be bonded and apply a uniform coat. Allow to dry to tack (approximately 1 minute) and press surfaces firmly together. Note: material is not repositionable.
4. For Maximum Bond Strength: Spray both surfaces to be joined with multiple coats of adhesive and dry to tack (1-2 minutes, depending on thickness) before bonding. Apply firm pressure when joining. Note: porous surfaces will require more than one coat.

Tip: To avoid possible clogging, turn can away from body, invert and spray a short jet to clear valve and spray tip.

Click on the Gorilla link at the top of this page to see more Gorilla Tough products.