Number of Tests | 100 |
Parameter | Hardness, total - as CaCO3 |
Platform | Drop Count Titration |
Range | 1 - 30 gpg CaCO3 |
Smallest Increment | 1 gpg |
Single parameter kits offer simplicity when testing for a specific parameter in your home, in the field, or throughout the facility. Each Hach test kit comes with everything needed to begin testing.
Hardness is a measure of the soap consuming capacity of water. The term comes from an expression of how difficult or "hard" it is to wash clothes with the water. When soap is mixed with hard water, these minerals combine with the soap and form a solid precipitate. This decreases the cleaning efficiency of the soap and forms soap scum. As more soap is added, solids continue to form until the minerals are depleted. When the minerals are no longer available, the soap forms a lather and works as a cleaning agent.
The minerals that precipitate with soap are cations such as calcium, magnesium, iron, manganese, and zinc. The concentration of calcium and magnesium in natural waters generally far exceeds that of any other polyvalent cation. Therefore, hardness is generally considered to be the concentration of calcium and magnesium in water.
Hardness can be classified as carbonate and non-carbonate hardness.
The amount of carbonate vs. non-carbonate hardness can be found by measuring alkalinity [link to the Alkalinity Parameter Page]. If the alkalinity is equal to or greater than the hardness, all of the hardness is carbonate. Any excess hardness is non-carbonate hardness. In the US hardness is typically reported in mg/L as CaCO3 or gpg (grain per gallon) as CaCO3. Because alkalinity is also reported as CaCO3, the results of the two tests can be compared directly. Total Hardness is the sum of all carbonate and non-carbonate calcium and magnesium salts present in the water.