[White]
[Black]
avoid temperature errors that may be caused by the heat of the screen itself.
allowing you to see the screen across the room easily.
it is recommended to use the 5.0 V power adapter for power supply, and insert batteries as a backup.
when plugged in the 5.0V power adapter, you can adjust 3 screen brightness.(Hi-Low-Off)
you can monitor the temperature and humidity in multiple locations around your house conveniently.
This is a modal window.
Tips: it is recommended to mount the sensor vertically in a sheltered location away from direct sunlight and with good ventilation. Metal siding, stucco, and certain types of glass can greatly reduce the range of the signal.
Q7 Weather Station | Q3 Weather Station | Q5 Weather Station | Q6 Atomic Projecter Clock | |
Sensor Included
| 1 | 1 | 3 | 1 |
Screen Size
| 7.5 inches | 7.5 inches | 6 inches | 4.5 inches |
Atomic Clock WWVB
| ? | ? | ? | ? |
Power
| Adapter, 3 AA (not included) | Adapter, 2 AA (not included) | 2 AA (not included) | Adapter, CR2032 (included) |
Backlight
| ? | ? | ? | ? |
Indoor outdoor temperature and humidity with 3 remote sensor channels, 328ft wireless transmission in open air (package comes with 1 sensor)
Full color display with adjustable brightness (HI-LOW-OFF, requires 5.0V power adapter), low battery indicator
Wireless indoor outdoor temperature (F/C) & humidity (%RH) with MIN/MAX recorded data in the past 24 hours, trend indicators
Self setting accurate atomic clock(PST, MST, CST, EST) & alarm clock & calendar & moon phase
Weather forecast & barometric pressure (allow 7-10 days for barometric calibration to ensure accurate personal forecast for your location)
Indoor comfort level & outdoor dressing index & Mold indicator, dew point display, heat index
Package includes: 1 x indoor weather station, 1 x remote sensor, 1 x 5.0V power charger, 1 x user manual
How long does the weather clock take to learn and calibrate when you use it for the first time?
1) It usually takes 7-10 days to calibrate.
2) If it is moved from one environment to another (such as bringing the sensor from outside to inside in winter), a calibration time of several hours may be required.
Is the sensor waterproof?
No.If the detection chip is added with a waterproof layer, it cannot be fused with the air directly, which will result in poor detection sensitivity & inaccurate humidity. Our chip detects the air directly, with higher accuracy & better flexibility.
The reason why the clock goes wrong automatically?
The default time zone of the weather clock is PST and the DST is OFF, you only need to simply set your standard time zone and ON/OFF DST according to the instructions when you use it for the first time. Then the clock wont be wrong.
When will the weather station automatically sync the WWVB signal to calibrate the time and date?
1) The clock will search for the WWVB signal automatically at 1:00-1:07, 2:00-2:07, and 3:00-3:07am every day.
2) If the WWVB signal is interfered or weak, it will also search WWVB once an hour. such as 10:00-10:07am,11:00-11:07am,12:00-12:07am...
The screen goes blank for 7 minutes while the weather station is searching for a WWVB signal, is this normal?
Yes. Since the WWVB signal is susceptible to interference from many factors, turning off the screen during the search can shield some interference factors.
Indoor Thermometer Dimension | 7.8L X 4.8H inches |
Inside Temperature | 14.2°F ~ 122°F/-10°C ~ 50°C |
Outside Temperature | -58°F ~ 158°F/-50°C ~ 70°C |
Inside & Outside Hygrometer | 1 % ~ 99 % |
Weather Station | 5.0V power charger; Battery: 3 x AA(not included) |
Remote sensor | Battery: 2 x AA(not included) |
Temperature Accuracy | +/- 0.5°F |
Humidity Accuracy | +/- 2% |