Feature

●Freely Adjustable: Suitable for most types of desktop laser engravers, you can adjust the Z height or reposition the base to fit the required clearance of the roller.
●Adjustable Width Range: Laser rotary roller engraving module has 5 levels of adjustable width, diameter 20mm-80mm can be used.
●Wide Compatibility: Support LaserGRBL, LightBurn and so on, suitable for most desktop laser engraving machines. If you are unsure of compatibility, please review the stepper motor specific wiring diagram below and check.
●Preloaded Engraving Module: The laser cylinder engraving module comes pre-loaded for easy installation. The kit is plug and play and can be used to engrave cylindrical objects such as pens and cups.
●Spacer and Screws: The combination of aluminum alloy spacer and screws makes the overall appearance more beautiful and very practical.


Description

Specification:
Item Type: Laser Rotary Roller Engraving Module
Motor: No. 17 stepper motor
Model: 17HS4401
Step Angle: 1,8° ± 0.09°
Rated Voltage: DC 3.6V
Rated Current: DC 1.5A per phase
Holding Torsion: ?420mN.M
Maximum No Load Starling Frequency: ?1900 PPS
Weight: 255 g / 9 oz(approx.)

Package List:
4 x Aluminum Alloy Gasket M3
8 x Aluminum Alloy Gasket M4
4 x Aluminum Alloy Gasket M5
2 x 2020 Profile L200mm
4 x Flange Bearing
2 x Rotary Drum
4 x Timing Pulley Fixing Plate
1 x Motor Side Plate
1 x Side Board
1 x 20 Teeth Synchronous Wheel Inner Hole 5
2 x 20 Tooth Synchronous Wheel Inner Hole 6
1 x No. 17 Stepping Motor
1 x Screw Nut Package
1 Kit
1 x Rubber Timing Belt
1 x Motor Wire
2 x Limit Ring
1 x Idle Gear
1 x User Manual

Notice:
Peel off black film before use to provide adequate functionality.Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.