Feature

●MULTIFUNCTIONAL CIRCUIT PROBE TESTER：The power circuit probe tester has multiple functions, such as detection Circuit Polarity, Voltage, Connection, Break, Lighting, Ignition Plug, Sensor Measurement, Grounding Test, Continuity Test, Component Activation and other functions. No additional tools needed to help you reduce car diagnosis time.
●2 WORKING MODES: The automotive test light supports 2 working modes: voltage mode and current mode(Resolution: 0.1V/0.1A), Two Clip Supply voltage: 5-36VDC, Probe test voltage: 1-60VDC, Probe test current: DC 0-8A. The electric test Pen usually default voltage mode, press the small black round button, you can easily switch to the current mode. It is powered by vehicle’s battery, no extra battery needed.
●EASY TO READ: The circuit tester combines an LCD digital backlight display with an LED red/green indicator light design, making it easier to read the voltage and current values of the screen and distinguish between positive and negative electrodes.
●ILLUMINATION FUNCTION: the test light probe built-in flashlight is bright enough to light up your work area. When the two alligator clamps respectively clamp the positive and negative ends of the battery, the flashlight immediately lights up, which is more convenient for you to test at night or in dark areas.
●OVERLOAD PROTECTION & BUZZER ALARM: In voltage mode, the Tester will display overvoltage warning when voltage exceeds 61VDC. The LCD will display “OL”, red LED light on. In current mode, If the current is too high, the LCD will display “OL”, buzzer alarm. When the current exceeds 8A, the tester will automatically disconnect to protect the circuit to reduce unnecessary losses. The disconnection time varies with the load current.
●EXTENDED SPRING WIRE & ANTI-LOST PROBE COVER: Compared with the ordinary wire, the automotive light tester comes with high quality spring wire that can stretch up to 196.85 inches, making the maintenance and diagnosis work more portable, convenient and fast. It allows you to test from the front of the car to the rear without constantly searching for a suitable ground. In addition, the integrated design of the anti-loss cover ensures no puncture wounds, no matter where you go will not be lost.


Description

multifunctional power probe testermultifunctional power probe tester

Specification:

● Two Clip Supply voltage: 5-36VDC

● Probe test Voltage Range: 1-60VDC

● Probe test DC Current Range: DC 0-8A.

● Resolution: 0.1V/0.1A

● Voltage Accuracy:±(1%+3digitals)

● Current Accuracy: ±(2%+2digitals)

● Operating Temperature: 0-50º

● Operating Humidity: <80%

LCD digital display voltage testerLCD digital display voltage tester

  • Overload Warning

  1. In voltage mode, the Tester will display overvoltage warning when voltage exceeds 61VDC. The LCD will display “OL”, Red LED light on.
  2. In current mode, If the current is too high, the LCD will display OL, buzzer alarm.

  • WARNING:

  1. The tester power supply voltage between 5 to 36VDC, and the probe test voltage from 1 to 60VDC.
  2. Do not use the tester for all AC voltage supplies or AC voltage test.
  3. The tester is used only when the power supply is less than 36VDC and the test voltage is less than 60VDC.

electrical diagnostic toolselectrical diagnostic tools

  1. Self Check
  2. Polarity Detection: Fast identification of positive and negative polarity, and open circuit.
  3. Continuity Test: Quick detect for continuity of switches, relays, etc.
  4. Test Components (Components Before Installation), Testing Components (Online Testing): Use the “power switch”, components can be activated by using positive/ground terminals, which can quickly locate faulty components or wiring problems.
  5. USE As Short Wire:The large grounded crocodile black clip in the tester and the auxiliary small black grounded crocodile clip are physically fixed connections. The user can disconnect from the original line connection (such as control switch or open circuit) and use the two black clips on the tester as connections for testing and maintenance (leaving the red clip disconnected from the vehicle’s battery).
  6. Check the Faulty Grounding: Instant detection of bad grounding, no need to waste the fuse, can trace and locate the break point.

2 working modes2 working modes
easy to useeasy to use
product descriptionproduct description

  • MODE BUTTON: Press the “mode button” to switch voltage mode or current mode.
  • POWER SWITCH:

  1. Press the “power switch” to position ( ? ). The indicator LED light on the tester is red, indicating that the probe outputs positive voltage and the LCD displays the current battery voltage.
  2. Press the “power switch” to position (=). The indicator LED light on the tester is green, indicating that the probe outputs negative voltage, the LCD displays , and the buzzer alarms.

  • EXTENDED SPRING WIRE: 196.85 inches
  • PROBE: Stainless Steel

Whats in the box

  • automotive circuit tester