Feature

●The load sensor is a group of half-bridge strain gauge, there are 3 ways to use it.
●LOAD CELLS -Internal for the 1000 ohm half bridge strain gauge, range 50kg load cell, half bridge structure.
●Use one load sensor 50kg with an external resistor to form a full-bridge measurement, the range of a sensor range: 50kg. External resistance on the higher requirements.
●Measuring range for the sum of the two sensors: 50kgx2 = 100kg;Measuring range for the sum of four sensors: 50kgx4 = 200kg
●This item is used widely in hopper scales, platform scales, platform balance, belt scales and other electronic weighing devices.


Description

Specifications:
Weight: 0.6 oz
Dimensions: 3.4×3.4 cm/1.33×1.33 inches
Capacity: 50 kg/110 lbs (each)
Structure: Half-bridge
Output Sensitivity: 1.0±15%mv/V
Nonlinearity: 0.05% F.S
Input Impedance: 1000±10ohm
Output Impedance: 1000±10ohm
Insulation Resistance: Pitt2000 M ohm
Working Temperature range: -10~+50℃
Overload capacity: 150% F.S

The sensor is a set of half-bridge strain gauges, there are three ways to use this method:
1. The resistive sensor forms a full bridge measurement, sensor range: 50 kg. External resistance requirements are higher.
2. Use two sensors to form a full-bridge measurement, measure the range sum of two sensors: 50kgx2=100kg
3. Use four sensors to form a full-bridge measurement, measure four sensors, range: 50kgx4=200kg

Package Contents:
10 × Half Bridge Weight Sensor