Feature

●Tool Kit：Suitable for electronic repair and DIY, any circuit board with small parts, such as mobile phone motherboards, cables, TVs, VCRs, radios, headphones, stereos, motors, toys and other electronic equipment. Correct the error of the small board on the PCB.
●Tool Kit：includes 6 welding aids and desoldering pump, desoldering core, Wire cutters, anti-static ESD tweezers
●Welding auxiliary tools: widely used in electronic repair, soldering, desoldering, etc. Can use cutting, scraping, hooks, brushes and other welding work requirements. Cutting pliers: Made of high-quality steel, it can accurately cut flexible cords within 1mm. Anti-static ESD tweezers: Made of high-quality stainless steel, anti-static, non-sticky.
●Desoldering pump: very sturdy, can remove excess solder on the circuit board, easy to operate with one hand, desoldering core:width 2.5mm / 0.098 in,length 1.5m / 59 in length, made of pure oxygen-free copper It has a strong ability to absorb tin. No cleaning is required and less residue.
●Tool Kit: Contains 11 necessary welding tools to save you multiple purchases. WARNING: Cancer and Reproductive Harm ? www.P65Warnings.ca.gov


Description

The welding kit includes 1 desoldering pump, 2 anti-static tweezers, 6 pieces of welding auxiliary tool set, 1 desoldering wick, 1 cutting pliers

How to use the tin absorber:

1. First, press down the piston of the tin aspirator until it is stuck.

2. Heat the solder joint with electric iron until the solder melts.

3. While removing the electric soldering iron, quickly paste the solder nozzle on the solder joint, and press the solder button.

4. It is not clean at one time and can be repeatedly operated for many times.

Tips for using the tin aspirator:

(1) Make sure that the piston of the tin aspirator is well sealed. Before power on, use your fingers to plug the small hole of the solder receiver head, press the button, if the piston is not easy to pop in place, it means that the sealing is good.

(2) There are different sizes of the hole diameter of the solder receiver head, so it is necessary to select the appropriate specification for use.

(3) After using the old head, replace it with a new one in time.

(4) Before touching the solder joint, dip a little rosin every time to improve the fluidity of solder.

(5) The time for the head to contact the solder joint is a little longer. When the solder melts, take the solder joint pin as the center, draw a circle clockwise by hand, and then press the solder aspirator button

The kit includes:

6 * Welding Auxiliary tools

1 * Desoldering pump

1 * Unsoldering core

1 * Wire cutters

2 * anti-static ESD tweezers