Feature
●Package includes: 6 x 60x60x2mm Soldering Iron Cleaning Sponge; made of thickened sponge. Expand to 6mm after soaking in water
●Usage: Spare sponge can be used with soldering iron holder or temperature control soldering iron system
●Once immersed in water, it will expand, large expansion coefficient, no sulfur, clean thoroughly
●No more waste of thick sponges. It is stacked when used, and only the top layer needs to be discarded after being soiled
●Application: Remove solder residue and keep PCB assembly clean
[60x60mm Square]
[51mm Round]
[50x35mm Square]
Description
Specification:
Type: Soldering Iron Cleaning Sponge
Shape: Square
Side length: 6cm
Thickness: 2mm
Material: PVA Sponge
Color: Yellow
Package includes: 6 x Soldering Iron Cleaning Sponge
This sponge is a special high temperature resistant sponge. It swells after absorbing water, and its surface is rough and porous, but it is as soft as cotton cloth. It is specially used to remove the oxide layer on the head of electric soldering iron.
It rubs off the oxide layer and dirt on the soldering head by rough but soft surface. It is not polished like sandpaper, so there is no need to worry about any wear and damage to the soldering head.
When the electric soldering iron is used for a long time, there will be a layer of oxide layer on the iron head, which makes it impossible to melt the solder, or the solder will not adhere to the head of the electric iron, so welding is very difficult. It is often that the tip of the soldering iron head is not stained with tin and cannot be welded. I think all the friends who have used electric iron have such experience. At this time, you can rub the electric soldering iron on the high-temperature sponge for several times, and the oxide layer of the iron head will be rubbed off, and the fresh soldering iron head inside will be exposed, which can be well welded.
Usage:
Soak the high-temperature sponge in water and squeeze out the excess water after expansion. Rub the hot electric soldering iron head on it for several times, then the oxide layer and welding slag on the iron head can be completely removed.
It will become dry after volatilization without water for a long time. It can be reused by soaking again.