Easy Installation Process
1,Turn off the projector and unplug the power cord.
2,Use a screwdriver to remove the screw from the cover.
3,Hold the bulb and pull it out straight.
4,Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the screws.
5, Reinstall the lampshade and Reset the lamp usage time.
NOTE:
1. Do not allow the projector to overheat; the primary cause of lamp failure is excessive temperature stress.
2. Allow the projector lamp to cool for at least 10 minutes after powering down, and never move the projector during this period or while the lamp is on. The lamp is much more susceptible to damage while it is hot.
3. Allow plenty of space around the projectors fan or exhaust so excess heat can be dispersed properly.