Feature
●The shower door threshold dam is made of high quality protection silicone, which is soft, heat resistant, odorless and not easy to break. It can be bent and cut at will according to the shape of your furniture.
●The water stopper is very easy to clean and maintain, just wipe it with a damp cloth.
●Water barrier can be pasted on almost any smooth surface, including walls, floors, tiles, etc. Shower edge water guard can be used around sinks and bathtubs, prevent water from falling to the floor. It can also cover the gap between the bathtub or counter and the wall, waterproof and dust-proof.
●Clean and dry the surface, tear off the tape and stick the bottom of the rubber kitchen sink splash guard to the target plane, press it repeatedly to make sure it is firmly fixed. You can also add your own glue to improve efficiency and durability.
●Please use a hair dryer to heat up the installation surface and backing before installation to get better adhesion. Remember to caulk around the joints.
[3m & 118 inch Clear]
Description
Name: Silicone Shower Threshold Water Strip Dam
Size:
Length: 39 inch, 78 inch ... 393 inch
Color: Black, Clear, Gray, White
Material: Silicone
Package Includes：
1 x Shower barrier water stopper
Installation method:
1. Thoroughly clean the surface of the installation site and keep it dry. ( This is very important)
2. Determine the installation location and mark it with a pen.
3. Use a sharp knife to cut out the required length. (Please note that the pre-cut or trim length of the dam cannot be returned)
4.Tear off the outer skin of the tape, and then place it to the marked position and gently press it. If the weather is relatively cold, you can use a hairdryer to heat the tape to obtain better adhesion.
5. Fill the gap with sealed silicone, And remove the excess silica gel, leaving a smooth filling line.
6. The sealing silica gel needs to dry after 24 hours, so it is not allowed to move or touch water within 24 hours.