How to Work ?
1. Clean injectors outside with gasoline or cleaning liquid before open machine
2 Putting injectors in ultrasonic bathtub after the outside of injector are free of dirt.
3 Turn on ultrasonic system,pulsed allowing the ultrasonic energy to dislodge any particles even build-up inside the injectors.
4 Fixed injectors on main machine
5 Testing injectors for resistance, shorts, and current draw
6 Performing leak test, spray pattern, and flow rate testing on flow bench.
7 The injectors are now returned to the flow bench for retesting of all functions.
Specification:
* Power supply: AC220V±10%, 50/60Hz;AC110V±10%, 50/60Hz.
* Input power: 250W;
* Ultrasonic cleaner power: 100W;
* Simulated RPM range: 109990rpm; step: 10rpm;
* Time range: 19999s;
* Pulse width: 0.525ms; step 0.1 ms;
* Fuel tank capacity: 4700ml;
* Dimensions: 385mm×410mm×500mm
* Weight: About 35kg
Launch CNC-602A injector &cleaner tester package list:
1 105020217 CNC pulse signal connection cable 1,T=0.5
2 105020218 CNC pulse signal connection cable 2,T=0.8
3 103260037 Ultrasonic cleaner assembly 100W
4 106030038 On-vehicle adaptor package(tool kits)
5 107010428 CNC-602A user manual(En&Ch)
6 103250013 Top-supply connector 1
7 103250015 Swiss thread adaptor for fuel top-supply injector
8 103250016 Coarse thread adaptor for fuel top-supply injector
9 103250018 CNC-601/801 Hexangular stopper
10 104990012 CNC-801 BUICK injector adaptor
11 199010019 Injector testing liquid (pick out)
12 307030024 Injecter detergent (pick out)