Feature

●Easy to adjust == 30 Amp power inlet plug connector (with cover and ring for adjustment and waterproof purposes) to keep the cable secure. Ascending to the back, the distance between the wires increases by 0.25 inches (2 inches wide); the total length is 3.9 inches (3.9 inches).
●Easy to adjust == 30 Amp power inlet plug connector (with cover and ring for adjustment and waterproof purposes) to keep the cable secure. Ascending to the back, the distance between the wires increases by 0.25 inches (2 inches wide); the total length is 3.9 inches (3.9 inches).
●Easy to adjust == 30 Amp power inlet plug connector (with cover and ring for adjustment and waterproof purposes) to keep the cable secure. Ascending to the back, the distance between the wires increases by 0.25 inches (2 inches wide); the total length is 3.9 inches (3.9 inches).
●Easy to adjust == 30 Amp power inlet plug connector (with cover and ring for adjustment and waterproof purposes) to keep the cable secure. Ascending to the back, the distance between the wires increases by 0.25 inches (2 inches wide); the total length is 3.9 inches (3.9 inches).
●Easy to adjust == 30 Amp power inlet plug connector (with cover and ring for adjustment and waterproof purposes) to keep the cable secure. Ascending to the back, the distance between the wires increases by 0.25 inches (2 inches wide); the total length is 3.9 inches (3.9 inches).
●Strong compatibility == Wire connectors are designed to protect your cable connectors and ensure a firm connection for RV, trailers, caravans, ships and other outdoor applications.
●New design == Twist-lock connector allows quick connection of cables to the input side clamp design for simple and firm connection. The wire connector consists of a bright yellow rubber cover + a heavy-duty black plastic ring, which maintains a weatherproof seal, good sealing performance, no leakage, and long service life.


Description

Specification:
Item Type: Cord Connector With
Cover
Ring
Material: Plastic
Total Mounting Length: Approx. 7.5in
Cover and Ring ID: Approx. 1.7in
Cover and Ring OD: Approx. 3in
Deep Inside: Approx. 3in
Outer Length: Approx. 5in
Connector Size(Measurement on Face): Approx. 1.7in
Rose to the back where the between the wires adds 0.25 inches (2 inches wide); total length is 3.9 inches (3.9 in)
How to Use:(Easy to Use)
1. Replace the end on your existing power cord with the 30 Amp Locking Connector with Boot and Ring.
2. Remove the housing by loosening the 3 screws on the face of the device, slide the included weather-resistant boot over the cable, and slide the housing over the cable.
3. Strip the outer jacket of the cord and each individual conductor.
4. Insert all the wires into the proper color-coded terminal pockets.
5. Tighten the terminal screws and strain relief screws.
6.
Slide the housing over the connector body, tighten the assembly screws, and slide weather-resistant boot over the complete assembly.

Package List:
1 x
Power Cable Connector
1 x Waterproof Cover