[#3]
[#4]
[#10]
[#5]
[#6]
[#7]
[#8]
[#9]
[#1]
[#2]
Specification:
Condition: 100% Brand New
Item Type: Ink Pad
Material: ink + sponge + plastic
Optional Color: BD-242 Light Blue, BD-252 Sand Yellow, BD-253 Antumn Leaves, BD-254 Chocolate, BD-256 Brick Red, BD-257 Rose Gray, BD-258 Sky Fog, BD-260 Celadon, BD-261 Wine red, BD-262 midnight blue
Quantity: 1PCS
Weight about 42g
Size: Approx. 9.5 x 5.52 cm/3.74 x 2.17 inches
Instructions and notes:
1. Gently tap the stamp with the stamp pad, the ink can be stamped evenly. If the color is faint, you can repeat the process.
2. When printing on fabrics, the cloth should be kept clean first, fabrics that have not been soaked are recommended to be covered after washing. After the oil has dried, iron for 15 seconds (160) to increase the color effect, but the degree of washability also varies depending on the type of fabric. (Color can also be fixed by other heat treatments, such as ovens, irons, heat guns, etc.)
3. Please note that it is not easy to cover the coarse fiber or cloth with fluff. If you can test the cover on the edge of the fabric before printing, then you neednt worry.
4. When printing on wood, use a hair dryer to dry thoroughly.
5. This pressure pad convex powder is available
6. all paper can also be used, the effect is very beautiful.
7. In order to extend the service life of the printing pad, the printing pad should be stored in a dry, light-protected place, close the lid, the lid surface remains up.
Package List:
1 x DIY ink pad