Feature

●Includes one (1) Tusk Uinta 14" diameter wheel and four lug nuts per wheel for all CAN-AM machines with a 4/137 bolt pattern.
●Rugged Beadlock design. Cast Aluminum wheel with a forged aluminum beadlock ring for light weight and maximum strength. Bigger and stronger 5/16" Grade 8 beadlock bolts. 1200 lb load rating for durability. Screw on center cap included. Oversize lug holes fit common 17mm sockets.
●Includes four (4) required 10mm x 1.25mm black tapered lug nuts for all non X3 machines. PLEASE NOTE- The X3 utilizes 12mm lug nuts. PLEASE MESSAGE US after ordering if you require this size.
●Chrome lug nuts available upon request.
●The 5+2 offset is stock stance for most machines, and the 4+3 offset widens your machine an inch on each side vs the 5+2.
●IMPORTANT: Please verify this wheel will work with your machine. If you do not have a CAN-AM UTV, chances are the wheels or lug nuts will not work for you. PLEASE MESSAGE US before ordering if you DO NOT have a CAN-AM, just so you can receive the correct wheels or lug nuts. We are NOT responsible for machine incompatibility if these are not ordered correctly.

[4+3 Wheel Offset Milled Black]

[4+3 Wheel Offset Candy Red]

[5+2 Wheel Offset Matte Black]

[4+3 Wheel Offset Bronze]

[4+3 Wheel Offset Gun Metal]

[5+2 Wheel Offset Machined]

Description

Rugged Beadlock design. Cast Aluminum wheel with a forged aluminum beadlock ring for light weight and maximum strength. Bigger and stronger 5/16" Grade 8 beadlock bolts. 1200 lb load rating for durability. Screw on center cap included. Oversize lug holes fit common 17mm sockets.