Feature:
1. 45° Bevel Cutter Mode: 45° bevel cutter mode, commonly used for bevel trimming of photo frame mounting, window cutting.
2. 90° Straight Knife Mode: 90° straight knife mode, commonly used for material trimming, shaping and cutting.
3. Double Ended Blade: Double ended and four sided blade design, when the blade is worn, change the side and continue to use it, saving time and worry.
4. Straight Cutting: Safe design, push in to prevent the blade from sliding out to ensure when not in use, the cutting effect is straight, the incisive stainless steel blade, and the cutting appearance is neat and glossy.
5. Scope of Application: DIY photo frame mounting operations, KT board, thick cardboard, corrugated cardboard cutting.
Specification:
Item Type: Paper Cutter
Material: Plastic
Main Use: Photo Frame Mounted on Cardboard, KT Board, Corrugated Board, Edge 45° Bevel or 90° Plane Cutting
How to Use:
45° bevel cutting steps.
1. The panel is completely lowered and the blade stopper is withdrawn and unlocked
2. Marks the cutting position with a straightedge
3. The front of the cutting knife close to the ruler and press down the blade sliding cutting
4. In turn, cut the required edge to complete
90 ° bevel cutting steps.
1. Fully lift the knife holder panel with the knife blade retracted (press the lock mode button after lifting)
2. In the cutting position scribing positioning scribe line aligned with the positioning points on both sides of the body
3. Straightedge first tighten the front hand support pressure after the knife blade and sliding along the straightedge cutting (point: the position of the straightedge with the body positioning)
4. In accordance with the above steps to cut the required side to complete
Replacement blade steps.
1. Remove the knife seats from the top
2. Blade off the head, replace
3. New knife put knife seats inserted back into
Package List:
1