Recommended Applications of RockMix 2:

• Two Person Live Stream/recording (Zoom, podcast, etc)
• One instrument and one singer who wants to record or live stream or perform live

Features of RockMix 2:

• Rockville RockMix 2 Channel Mic+Instrument Pro Recording Mixer with USB Recording Interface
• Switchable +48v Phantom Power on both channels for use with condenser microphones
• Channel 1 and Channel 2: XLR and ¼” TRS combo input jacks
• Channel 1 is a microphone channel
• Channel 2: mic/instrument level switchable allowing you to connect a mic, instrument, or any other audio device
• Independent Level Controls for Main and Headphone/Monitor Outputs
• Integrated Plug-and-Play USB Audio Interface for Mac & PC
• USB Interface will send the master output in stereo to your DAW so you can record and/or stream your mix
• Operates on USB BUS Power or 5V DC External Power Supply (Included)
• Low power consumption means you can power the mixer from the USB of your laptop or by plugging it into an outlet or through a standard 5V powerbank
• Super mini 2-channel mixing console designed for home studio recordings or live broadcast streaming
• RCA (L&R) outputs allow you to send the master output to an amplifier, powered speakers, recording device, etc
• 3.5mm headphone output
• Additional 3.5mm mic input allow you to connect an additional microphone in addition to the 2 main channels
• Each channel has a 2-band EQ to customize the sound
• Each channel has pan and level controls
• USB playbck switch assigns the signal to the MAIN MIX or MONITOR
• Monitor/headphone level control knob
• Main mix level control knob
• No external drivers are needed for mac or PC

Specifications of RockMix 2:

Sensitivity/impedance:

• CH1 & CH2 XLR: 2mV/1.8k ohm(gain max)
• CH1 Jack: 10mV/ 12k ohm(line)
• CH2 Jack: 30mV/ 20k ohm(line), 30mV/240k ohm(guitar)
• Output Level: 5.8V max(main, monitor)
• Frequency Range: 20-22000Hz
• THD: <= 0.05%
• S/N Ratio: 80dB

Equalizer:

• Bass Range: ±15dB/80Hz
• High Range: ±15dB/12kHz
• Headphone: Impedance: >=16 ohm
• USB Interface: USB1.1 compatible, 16-bit delta-sigma, 44.1kHz sampling rates, 48kHz max.
• Phantom Power: +48V
• Power Supply: USB 5V 500mA Via USB Port of Computer; Via USB Power Adaptor; Via power bank
• Operating System: Windows 2000, XP or higher; Mac OS 9.0.4 or higher, 10.X or higher
• Item Dimensions (inches): 3.9” x 5.3” x 1.65”
• Item Weight: 0.95lb

Description of DT-990-PRO-250:

The DT 990 PRO is an open dynamic headphone for studio applications. Due to a weight reduction of the diaphragm an excellent sound reproduction quality is achieved. Its rugged design with a spring steel headband ensures a secure fit and withstands all demands. Soft headband and ear cushioning systems ensure a high comfort over long periods of time.

Features of DT-990-PRO-250:

• DT 990 PRO Professional Open Back Dynamic Monitoring Headphones
• Open, diffuse-field studio headphone
• Professional version of the many times awarded “DT 990”
• Extremely lightweight diaphragm for superb impulse performance
• Excellent sound reproduction
• Comfortable fit due to rugged, adjustable, soft padded headband construction
• Robust, easy serviceable construction as all parts are replaceable
• Single-sided cable
• Velour, circumaural ear pads
• Transmission type : Wired
• Headphone design (operating principle) : Open
• Headphone impedance : 250 ohms
• Headphone frequency response : 5 - 35.000 Hz
• Nominal sound pressure : 96 dB
• Construction : Circumaural (around the ear)
• Cable & plug : Coiled connecting cable with mini-jack plug (3.5 mm) & ¼“ adapter (6.35 mm)
• Net weight without packaging : 380 g

Features of RTMS21:

• Rockville RTMS21 Desktop Tripod Dynamic Microphone Stand With Pop Filter and Shock Mount
• Shock mount has adjustable angle
• You can adjust the mic inside the shock mount up and down
• Compatible with microphones with diameters of 36MM and under (1.42 inches)
• Light-weight, Extremely durable and strong
• Tripod features rubber feet
• The Pop Filter is made of high quality double nylon net filtering
• There is a space between the 2 filters for best pop filtering
• The pop filter immediately improves the sound of your vocals for recording, podcasting, or broadcasting
• Detachable designed for convenient storage and easy transport

Features of RC135TRS:

• Rockville RC135TRS 3.5mm Male to Dual 1/4" TRS Female Headphone Splitter Cable
• 100% Copper Conductors for Enhanced Signal Clarity
• 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
• Gauge: 26 AWG
• Color: Black
• Length: 1 Ft.

Description of RMC-XLR:

The Rockville RMC-XLR is the same exact microphone we use in our Pro Mic Kit 1 microphone/stand bundle. This mic was created because we saw a need in the market for a high quality microphone at an affordable. We found there were a lot of good mics around from reputable brands that sound great, but are very expensive. When we looked at the cheaper mics on the market from both reputable and entry level brands; we were not impressed at all. As a result we sent our very own product developers on a mic testing journey. A lot of our employees here at Rockville love to do karaoke, so it was not long before we found a mic that we all loved.

You may be asking yourselves, so what makes this mic sound so good? There are 3 main components that make a mic sound the way it does. The cartridge, the magnet, and the mic cable. Our mic uses an M-56 cartridge which has a neodymium magnet. This combination of components supplies better sensitivity; which means your mouth will not have to be on the mic for it to pick up the sound. Our components supply more than a great pickup pattern. They have very little background noise, and great tone.

We pay a lot of attention to detail. We could have saved a lot of money and got our cost down by including a cheap cable, but we know how important the cable is. We are very passionate about our products and we really have a lot of respect for our customers. For this reason alone we included 100 % OFC copper cables. There is no aluminum in this cable! It is Pure oxygen free copper. What this means is that the cable will last longer and will sound a lot better. You will get a distortion free signal. We use a true gauge mic cable with proper thickness.

The body of the microphone is also something we paid a lot of attention too. We did not want it to be too light and feel cheap. We made a nice solid metal microphone. It has a great feel to it. We could have gone with plastic or cheaper metal, but we wanted to go with a mic that we ourselves would want to use.

Features of RMC-XLR:

• Rockville RMC-XLR High-End Metal Handheld Wired Microphone Mic Amazing Sound!

Mic Features:

• M-56 Cartridge
• Full metal mic body
• Type: dynamic
• Neodymium magnet
• Polar Pattern: uni-directional
• Frequency Response: 80 - 13Khz
• Impedance: 600 Ohms ± 30%
• Sensitivity: -72 ± 3dB

Case Features:

• High quality plastic carry case protects the mic during transportation
• Comfortably holds microphone and mic cable

Cable Features:

• XLR to ¼” Cable
• XLR to XLR Cable
• 10 Feet each
• 100% OFC oxygen free copper
• Cable delivers crystal clear distortion free signal
• Cable is 5 MM thick with cover (22 AWG standard mic cable)
• XLR cable connectors are very solid and durable

Mic clip Features:

• Heavy Duty Standard Size Microphone Clip
• Stand Mountable
• Solid Plastic Construction with copper inside (part that screws to the mic)
• Black Color