Essex Magnet Coil Wire is UL recognized Class 200 magnet wire that conforms to all of the requirements of NEMA MW-35C. Essex is one of the largest magnet wire supplier in USA. We highly recommend Original factory spool professionally wound by the magnet wire manufacturer. Unprofessional re-spooling can easily damage or scrape the insulation film, damaged magnet wire can not be used for coil winding. Poorly re-spooled wires can ultimately reduce coil winding quality.
This type of Essex magnet wire is the standard of comparison for magnet wire performance in virtually every severe and heavy duty application. The combination of a modified polyester basecoat and an improved polyamideimide topcoat results in an insulation system with outstanding physical toughness, excellent dielectric properties, and superior chemical resistance to most common solvents and refrigerants. Windability of this type of Essex magnet wire, verified by years of experience on virtually every type of winder, has always been excellent.
Magnet Wire Premium Quality, Enameled Copper MW-35C High Temp. 200 Degree C
High Temperature Class: 200°C (392°F), MW-35C High Temp
Magnet Wire AWG Size: 15 AWG, Round
Insulation Type: Polyester-Polyamide-Imide, Polyester Basecoat, Polyamide-Imide Topcoat.
Insulation Build: Heavy build, more durable than single/double builds
Nominal Diameter: 0.0603 inch
Nominal OHMS/LB: -20 Celsius: 0.3168
Feet per Pound: 99.60
Magnet Wire Applications:Motors, wind generators, Power tools, alternators.
Transformers: All dry type, Class 105 through 200, Control Type.
Electronic coils, Class 105 through 200.
Note: Magnet Wire Spool Weight ranges from 9 to 11 lbs.