Feature
●?【Built-in 2-in-1 Calibration Signal Generator】This TinySA Spectrum Analyzer built-in calibration signal generator that is used for automatic self test and low input calibration.When not doing spectrum analyzer,it can be used as signal generator with two frequency outputs,MF/HF/VHF sinus output for 0.1MHZ-350MHz and UHF square wave output for 240MHz-960MHz.
●?【 Frequency Range】The tinySA Spectrum Analyzer displays 290 scanning points,covering the entire range of low-frequency or high-frequency ranging frequencies.0.1 MHz -350 MHz high quality IF/HF/VHF input,240 MHz -960 MHz low quality UHF input.A switchable resolution band-pass filter suitable for the range from 2.6 kHz to 640 kHz.
●?【PC Control】TinySA Spectrum Analyzer can be connected to PC through USB and realizes the serial over USB (CDC) protocol,which can call a large number of commands.The Windows driver will be automatically installed after connecting to the Windows computer.The Linux driver is built into the kernel.
●?【Portable Spectrum Analyzer & ESD Protection Function】TinySA Spectrum Analyzer is latest version 3.1, new ESD protection function, installed diodes,so that it has more sensitive response performance,efficient anti-static level,better quality,longer service life.Built-in 650mA battery,rechargeable and portable use for at least 2 hours.
●?【Good Service】TinySA Spectrum Analyzer Package List:1x Tiny Spectrum Analyzer,1xBox,2 x 20cm RF Cable,1 x USB-C Cable,1 x SMA Telescopic Antenna,1 x SMA Female to Female Connector,1x Touchscreen Pen,1xTouch screen paddles and lanyard.If you have any questions can contact us, we will sincerely service to your satisfaction,we can provide a full refund service until you are satisfied.
Description
Upgraded TinySA Spectrum Analyzer,Karagas Spectrum Analyzer Handheld,MF/HF/VHF Input for 0.1MHZ-350MHZ and UHF Input for 240MHZ-960MHZ,
Portable tinySA Spectrum Analyzer with ESD protrcted function .It can be used as Signal Generator.
Display resolution 320*240 pixels , Screen diagonal 2.8" , 16 bits per RGB pixels , Resistive touch control , Jog switch control , USB serial port control , Optional TTL USART port (SW not yet implemented) on the internal , PCB Linear power supply to avoid switching noise.
The Latest TinySA Spectrum Analyzer V0.3.1
Upgraded ESD Protected Function:
Have a higher antistatic level and a longer life.
2021 Latest 3.1 Version:
The Performance is more stable and sensitive.
The latest version 3.1, new ESD protection function, installed diodes,so that it has more sensitive response performance,efficient anti-static level,better quality,longer service life.Built-in 650mA battery,rechargeable and portable use for at least 2 hours.
This TinySA Spectrum Analyzer built-in calibration signal generator that is used for automatic self test and low input calibration.When not doing spectrum analyzer,it can be used as signal generator with two frequency outputs,MF/HF/VHF sinus output for 0.1MHZ-350MHz and UHF square wave output for 240MHz-960MHz.
The 2.8-inch color touch screen displays 290 scanning points,covering the entire range of low-frequency or high-frequency ranging frequencies.0.1 MHz -350 MHz high quality IF/HF/VHF input,240 MHz -960 MHz low quality UHF input.A switchable resolution band-pass filter suitable for the range from 2.6 kHz to 640 kHz.
