Convenient installation, easy to level, it does not occupy any effective molding space of your printer. - Take the sticker off from the hotbed.
- Unscrew the before screw, use the new screw through the spring, fix in the hole of the hotbed slider board, tighten the large size red leveling twist.
|
NOTE : - The length of springs are about 25mm, which is slightly longer than the ender 3 series printers(Including ender 3/ender 3 pro/ender 3 v2). The springs need to cut them shorter than the original ones in order to adapt them to the printer or adjust the hot bed to be higher to fit the springs.
- The length of screws is 35mm, if your printer hot bed screws are 40mm, please adjust the hot bed lower and leveling again to print. Upgraded aluminum hand twist level nut makes hot bed more stable and print platform leveling easier.
|
- Upgraded aluminum hand twist level nut makes hot bed more stable and print platform leveling easier.
- Aluminum hand twist leveling nuts with bright color large size.
- 4 red balance wheels are made of upgraded aluminum material with long use lifetime.
- The diameter size is 2.36 inches/6 cm, easy to adjust the hot beds position.
|