|
|
|
|
---|---|---|---|
Step1:Open the handles and thread the rivet nut onto the mandresl. |
Step2:Insert the rivet nut into the previously drilled hole. |
Step3:Close the handles to deform the rivet nut. |
Step4:Once nut is installed, spread open handles and squeeze the handles 2-3 times to remove mandrel from nut. The rivet nut is finished. |
|
|
|
|
---|---|---|---|
Step1:Insert mandrel into stem. (Push the stationary sleeve backward when installing or unloading). |
Step2:Install the sleeve. |
Step3:Install the nosepiece matching mandrels. |
Step4:Tighten with included spanner. |