Feature
●Installation Dimension: 52mm(2")
●Indicating Range: 0-100%
●Working Voltage: 9-32V(12V/24V)
●Backlight: Red
●100% waterproof and anti-fogging protection
Description
Product Features:
-Be suitable for all kinds of fuel level sensors with same signal, and display liquid level of the oil tank
-Use moving-magnet principle to drive the needle, featuring good endurance and anti-vibration.
-IP67 waterproof and dustproof grade
-Stepper motors used for full range of stepping gauges, great feature with its less power consumption, longer life, higher precision, etc.
-With curved glass (with anti-fogging function)
-With ultra-wide working voltage design( long-term operating voltage: 9-32V, Maximum up to: 36V (≤ 1 min)).
Product Introduction
|
|
|
|
|---|---|---|
How to install it?- Cut an 52mm (2 1/16") hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. - Put the gauge in the hole. - Using M4 nut and C type bracket to seal up the gauge. |
How to connect wires?Red wire --- Power Positive. Black wire --- Digital Fuel Level Signal. Orange wire (backlight) --- Power Positive. Blue wire --- Power Negative. Please note: Digital Fuel level meter can be connected to 12VDC and 24VDC power directly. |
Why does digital fuel level meter not work?- Digital Fuel level meter cannot work well. Because its signal dont match the signal of fuel level sensor. - Confirm your digital fuel level meter signal firstly. - If its signal is 0-190 ohm. please work properly with fuel level sensor 0-190 ohm. - If its signal is 240-33 ohm. please work properly with fuel level sensor 240-33 ohm. |
Recommend 0-190ohm digital fuel level sensor
- 150mm NO. B075CH3TTR
- 175mm NO. B075CFCPBR
- 200mm NO. B075CGTT9J
- 225mm NO. B075CH4BVR
- 250 mm NO. B075CGG47K
- 275 mm NO. B075CH425R
- 300 mm NO. B075CGSHGH
- 330 mm NO. B086GMYNSV
- 450 mm NO. B075CHWBSP
- 500 mm NO. B075CL5SG5
Package Includes:
1x Digital Fuel Level Gauge
1x Multi-plug socket
1x Installation Instruction