Feature
●1. The work parametres, such as opening/closing speed, hold open time, opening/closing angle etc. could be adjusted on the controller directly. It doesnt need a separate hand programmer any more.
●2. 24VDC 50W brushless motor, the motor transmission is simple and stable. The electric lock and access control accessories could be connected to the controller directly. It doesnt need separate 12V power supply.
●3. Safety anti-clip function: The door will go backward when people or moving obstacles approach while closing, whichprevents the clamp injury or damage of the door itself.
●4. Push and go function: No need to push with force, turn K3 up to choose this function. This is very important for largecrowds in public.
●5. Manually open when power off. Optional backup battery can ensure the normal operation in case of power failure.Single leaf swing door opener is widely used in hotel, office, hospital, restaurant, shipping centers
[Blue]
Description
The product itself does not have logo; and please get noted; this will be easy for customs inspection without logo.
1. 100kg loading force;
2. door width: max 1200mm
3. AC220, 50W;
4. adjustable opening speed: 250~450MM/S;
5. auto opening time: 1~30s, adjustable;
For this door opener, there is inswing arm or outswing arm; please confirm it when buying; only with one kind of arm;
Opening directions as below:
Button 1to change the opening speed, left for slower speed, right for faster speed;
Button 2 to change opening buffet angle;
Button 3to change the closing speed;
Button 4to change the closing buffet angle;
Button 5to change the holding time of opening status;
Button K1to choose opening direction: inswing or outswing;
Button k2to choose mater opener and slave opener when there are two openers used in the same door for two leaves;
Button k3to change the holding force in closing status;
Button K4to choose the door leaf holding force;
the mater opener is the one which opens first and closes last; K2 button on the master opener should be in up position; the slave opener open later and close first, k2 button in down postion; the sensor and access control signal should be connected with master opener;