[1 Pack]
Formerly Akonaseal Polyurethane Masonry/Joint Sealant, this product is a multipurpose, moisture-cure sealant that is designed to meet the flexibility requirements of dynamically moving cracks and joints.
Use cartridge in standard caulking gun. Trim cartridge tip at 45° angle to desired bead size. Puncture seal multiple times with a seal punch.
Place in a standard caulking gun.
Fill joints from the bottom to avoid forming air voids. Excess sealant can be removed with a sharp-edged tool. Remove thin films by abrading.
Product should be air-cured. Protect joints from traffic and debris for 72 hours. Reaches full cure in 7 days.
Joint Size | 1½ inch wide x ½” inch deep |
Coverage | Approximately 12 lin. ft. at ½ in. x ¼ in. joint (3.6 m at 13x6 mm) |
Curing | Approximately 7 days |
Shelf Life | One year from purchased in unopened tube |
Storage | Store in dry, cool location. DO NOT ALLOW PRODUCT TO FREEZE! |
Akonaseal | Akona Mortar Repair | Rapid-Loc Stone & Veneer | Anchoring Epoxy | |
Masonry | ||||
Concrete | ||||
W x D | 1/2 inch x 3/4 inch | 3/8 inch x 3/8 inch | N/A | ⅛ inch x ⅛ inch |
Horizontal | ||||
Vertical | ||||
Paintable | ||||
Rebar | ||||
Holds objects in place |