Strict Process & Sharp Tooth Tips
After the production grid processing technology, the teeth are in an inverted cone shape and are evenly arranged.
The depth of the teeth is large, and the tips of the teeth are very sharp to ensure that the jaws are clamped when clamping the car.
Can firmly grasp the iron sheet without falling off.
After special quenching and tempering, high-frequency equipment processing, the jaw hardness can reach
Above HRC55 degrees, the jaw teeth are not easy to wear and have a longer service life.
The jaw bite force is not strong
The jaw bite force is not strong, it is easy to fall off when stretched, and it is often processed
defect. The hardness of the product is low, and it will wear out after a period of use.
If you live in a maintenance vehicle, you will also need to replace the clamp with a new one.
Highest Strength Bolts
The highest-strength 12.9-grade bolts are used, and 12.9-grade bolts are used.
The tensile strength of the bolt is 1.7 times that of the 8.8-grade bolt, and it will never deform during normal use.
Common strength class 8.8 bolts
Using ordinary strength 8.8 bolts, after a long time of use,
The bolt will be bent and deformed, resulting in the jaw not being clamped tightly. If it is not replaced in time, the
Change, there is a danger of being caught in the process of stretching.
|
|
|
|
---|---|---|---|
01/saving manpowerClipper design to make operators do not need fixed by screws. Humanization design, very suitable for use in narrow space. |
02/Increase efficiencyThe small protrusion on the back of the jaw prevents the bolt from turning during the tightening process, without the need to tighten with two wrenches; |
03/Big head pull ringThe front end and the mating surface of the jaws are tapered to ensure that during the stretching process, the tighter the pull. |
04 / sharp cone tipThe jaw teeth are processed into sharp cone tips, with strong bite force, and after high frequency quenching, good wear resistance |
5 Ton Right-Angle Two-Way | 2-Way Pull Clamp Repair Clamp | 3 Ton Self-Tightening Scissor Clamp | |
---|---|---|---|
Max Pull Capacity | 5 Ton | 5 Ton | 3 Ton |
Pull Way | Top and Straight | Top and Straight | Top |