Before using, please follow the instructions illustrated below:
1. Connect the power port to the power supply.
2. Connect the HDMI 2.0 output port to the monitor using an HDMI cable.
3. Connect the USB-C input port to the USB camera using a USB-C cable.
Please take note of the following instructions:
1. The adapters power should not be lower than 5V/2A/10W.
2. Do not use the USB port of the computer for the power supply.
3. In case you need to control OBSBOT Tiny Series or OBSBOT Meet Series with a remote control, you can connect the OBSBOT remote control (Meet control and Tiny control) Receiver to the USB 2.0 port.
4. If the UVC signal is 4K@30fps, HDMI output to 4K monitor, the output resolution will turn up to 4K@60fps to adapt to the real effect of the monitor.