Feature

●The measuring frequency of the analyzer is between 50Khz~900Mhz.
●This is a NanoVNA vector network antenna shortwave analyzer.
●Suitable for measuring S-parameters, VSWR, phase, delay, Smith chart.
●The RF output of the analyzer is -13dbm and the up to -9dbm.
●Equipped with a 2.8in TFT for clear display,a USB and a Type-C.

Description

Feature:
1. The measuring frequency of the analyzer is between 50Khz~900Mhz.
2. The RF output of the analyzer is -13dbm and the up to -9dbm.
3. This is a NanoVNA vector network antenna shortwave analyzer.
4. Equipped with a 2.8in TFT for clear display,a USB and a Type-C.
5. Suitable for measuring S-parameters, VSWR, phase, delay, Smith chart.

Specification:
Item Type:VectorNetwork Antenna Shortwave Analyzer
Printed Circuit Board Size:55 x 86 x 12mm / 2.17 x 3.39 x 0.47in (Without Connector and Switch)
Measuring Frequency:50Khz~900Mhz
RF Output:-13dbm(Maximum -9dbm)
Measuring Range:70dB (50kHz-300MHz), 60dB (300M-600MHz), 50dB (600M-900MHz) with extended firmware enabled)
Port SWR:<1.1
Display:2.8in TFT(320x240)
USB Interface:Type-C
Communication Mode:CDC(In Serial)
Power: USB 5V 120mA, built-in 600mAh battery, maximum charging current 0.8A
Number of Scanning Points: 101 (fixed)
Display Tracking: 4, Marking: 4, Setting Save: 5

Package List:
1 x Analyzer
1 x USB Cord
2 x Connection Cord
3 x Yellow Connector
1 x Silver Connector

Note: