[SET1]
NOTE:Iron tip do not work continuously high temperature, high temperature work is easy to damage the tip!
Ordinary solder melting point is 183℃, normal solder melting point is 227℃, usually the welding temperature is 300-380℃, 380℃ is the temperature of the dividing line, higher than 380℃, iron head oxidation and loss is extremely fast, seriously affect the heating core life The Higher than 380℃ temperature display will be beating, the higher the temperature, the greater the beating!Recommended in the 300-380℃ for welding work, most of the work can be carried out, the temperature beating is normal, does not affect the use!
The soldering iron used in this soldering station is a brand new soldering iron tip. Due to the unstable resistance of the new soldering iron tip, the temperature will jump or ERROR, which is normal. After several times of use, the stability will gradually stabilize. If you mind, please do not buy.
Fast heating, accurate temperature control,fast temperature return, humanized settings,various options settings,arious protection and energy saving technology, and buzzer sounds reminder.
The BOOST function can instantly increase the temperature when you press the encoder short. Can help you better solder large solder joints.After choosing strengthen the time function, short press the encoder and enter the time or temperature setting. The time setting range: 0-99 minutes.the temperature setting range: 10-80 degree.
Anti-slip insulation
New appearance design
Unique 4-pin handle
|
|
|
---|---|---|
AC 100-260V Power Interface DC 24V4A power interface Pwer Supply Inside is Grounded,So It is Surely Safe. |
4pin 907 handle and Solder tips lead-free, weld firmly 1.1m Cable Wire,4 Cores Easy to replace,Heating fast, long service life. Use under 400 degree temperature(±20 degree), it can have 50000 solder joints. |
T12 special power board 108W meets T12 instantaneous power requirements No downtime, long life, safe and stable. |
|
|
|
---|---|---|
0.96-inch displayThe T12-952 soldering station is made of metal case, 0.96-inch display and Brown acrylic screen to make the display data clearer. Matters needing attention When using the T12 iron tip please tighten the nut for soldering head to avoid falling and damaging the iron tip.The temperature will be reached above 350degree of soldering station is used for 40 minutes, and the temperature of the front end of the handle will be reached 50degree -60degree.When the new T12 soldering iron tip is used for the first time,Host will appear temperature jump and display ERROR,it will become a normal phenomenon due to the heating of the inner galvanic couple part of the iron tip. After repeated use several times, the temperature will be stabled. |
1.calibration 2.auto sleep 3.auto power off 4.boost duration 5.Boost degree 6.wakeup method 7.buzzer switch 8.battery guard 9.firware |
The main is light, only 370g Easy to carry and safe to use. |
Short press encoder, into the power off time setting, the time setting range: 0-99 minutes, Default power off time for 1 minute, means after 1 minute the host and handle is stand still, the soldering station will entry to power off time state, soldering iron tip will drop to indoor temperature