Feature
●★4x156 Wheel Spacers Specification: 4 PCS 1.5 inch (38mm) Thickness /4X156 Bolt Pattern /131mm Hub / 3/8-24 Studs/Nuts/ Blue anodized Finish.
●★ATV Wheel Spacers Package Includes: 4X Wheel Spacers (1.5 inch thickness per unit), 2X High Strength Thread-locking (red), 2X Instructions, 2X Vehicle Stickers.
●★UTV Wheel Spacers Applications: (I) 1998-2009 Polaris Ranger (II) 2008-2012 Polaris RZR (III)2001-2011 Polaris Sportsman (IV) 1987-2006 Kawasaki KSF 250 Mojave etc
●★BENEFITS:(I) CNC automatic processing ensure high accuracy and stability. (II)6061-T6 aluminum forged alloy material. (III)High quality pre-installed heat treated 10.9 grade studs. (IV) Geomet finish studs for better antirust effect. (V) Provides increased wheel and tire clearance.
●★PRODUCT WARRANTY: All PreeminentMotors products are covered by the two (2) years warranty to be free of defects in material and workmanship for two (2) years from date purchased. Please reach our helpful service representatives if you have any questions or concerns.
[1.5 inch]
Description
Specification: 4X156 to 4X156 PCD (Vehicle/ Wheel Bolt Pattern), SAE 3/8-24 Studs,131mm Hub Bore, 4pcs 1.5"
Check the recommended vehicle Compatibility/ Fitment below, do not risk for inappropriate vehicle.
Compatible with POLARIS MODELS
1998-2009 Polaris Ranger ---Front & Rear Wheels
2008-2012 Polaris RZR --- Front & Rear Wheels
1999-2006 Polaris Diesel 4x4 --- Front & Rear Wheels
1999-2008 Polaris Sportsman 335 4x4 ---Front & Rear Wheels
2001-2011 Polaris Sportsman 400 --- Front & Rear Wheels
1996-2011 Polaris Sportsman 500 ---Front & Rear Wheels
2003-2011 Polaris Sportsman 600 4x4 ---Front & Rear Wheels
2002-2011 Polaris Sportsman 700 4x4 ---Front & Rear Wheels
2005-2011 Polaris Sportsman 800 4x4 ---Front & Rear Wheels
1996-2008 Polaris Xplorer 500 --- Front & Rear Wheels
Compatible with KAWASAKI MODELS
1995-2000 Kawasaki 300B Lakota --- Front & Rear Wheels
1987-2006 Kawasaki KSF 250 Mojave --- Front & Rear Wheels
1987-1988 Kawasaki KXT 250 Tecate 4 --- Front & Rear Wheels
IMPORTANT NOTES:
1. Some ATVs require different bolt pattern for front & rear. If your ATV bolt pattern is not 4x156, this will not fit.
2. If your ATV does not have 3/8-24 Studs, this will not fit.
3. If your ATVs hub lip is larger than 131mm, this will not fit.
4. Fender Gap: Measure your wheel gap for clearance. You will need at least 1.5" (38mm) of fender clearance to prevent the wheel/tire from hitting the fender.
5. No rust on the inner of hub and wheel while installing the wheel spacers. If the studs do pass the face of the adapter, you will need to grind/cut them shorter.