All stickers are made from high quality and durable materials. They provide a long service life and an attractive appearance for the stickers. We use only European and American ORAJET materials and branded ink for printing. Decal colors remain vibrant and vibrant despite exposure to sunlight, rain, and snow. And if over time you get tired of the sticker and you want to replace it, the sticker can be peeled off without much effort. This will not leave any traces on the car. How to stick a sticker on a car? It is best to apply the sticker in a warm, dry environment. If the procedure takes place outside, the temperature should be at least 50 degrees Fahrenheit, and the weather should be clear and calm. In order for the sticker to be applied smoothly, and to hold securely and for a long time, you need to glue it correctly. 1. Before sticking the sticker on the surface, you need to thoroughly rinse the area on which you are going to apply the sticker and firmly press it. For rinsing we recommend a soap solution is suitable (as a last resort if surface is oily use alcohol or solvent). There are two options for applying a sticker: Option A. 1. Moisten the area where you want to stick the vinyl with a mixture of water and detergent. 2. Gradually tear off the protective film from the back of the sticker, starting from the top, apply sticker to the surface and smooth out the sticker. 3. Gently smooth all areas with a soft, clean cloth to remove any bubbles. 4. Let the decal dry for half an hour. A hair dryer can be used to speed up this process. Option B 1. Place and align the middle of the sticker on the prepared area and start smoothing from the center to the left and right edges. 2. Gently smooth all areas with a soft, clean cloth. 3. Let the decal dry for half an hour. A hair dryer can be used to speed up this process. IMPORTANT. It is necessary to dry and smooth in the direction from the center to the edges. Otherwise, bubbles and bumps may appear. Removing the sticker