

| Fixing dimension | 52mm(2") |
| Indicating Range | STBD-PORT |
| Signal | 0-190ohm |
| Working Voltage | 9-32V(12V/24V) |
| Backlight | Red |
| Operation mode | LCD display, stepper motor |
|
|
|
|
|---|---|---|
How to install it ?- Cut an 52mm (2 1/16") hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. - Put the gauge in the hole. - Using M4 nut and C type bracket to seal up the gauge. |
How to connect wires ?Red wire --- Power Positive. Black wire --- Rudder angle Signal. Orange wire (backlight) --- Power Positive. Blue wire --- Power Negative. Please note: Rudder angle meter can be connected to 12VDC and 24VDC power directly. |
Recommend Rudder angle sensor- B07V4PTW89 |
-Be suitable for all kinds of rudder sensors, and display the direction of the underway marine.
-Use moving-magnet principle to drive the needle, featuring good endurance and anti-vibration.
-IP67 waterproof and dustproof grade
-Stepper motors used for full range of stepping gauges, great feature with its less power consumption, longer life, higher precision, etc.
-With curved glass (with anti-fogging function)
-With ultra-wide working voltage design( long-term operating voltage: 9-32V, Maximum up to: 36V (≤ 1 min)).
|
|
|
|
|---|---|---|---|
| Rudder angle gauge | Rudder angle gauge | Rudder angle gauge | |
| size | 52mm | 52mm | 85mm |
| color | white+stainless steel | black+stainless steel | black+black |

1x Rudder Angle Indicator
1x Rudder Angle Sensor
1x Multi-plug socket
1x Installation Instruction