[Mars 2 Pro (140x84mm)]
[Mars(135X75mm)]
[Photon mono(135x80mm)]
[Mars 3 (150x95mm)]
|
|
|
---|---|---|
Easy to disassembleThe model can be removed directly by bending the spring steel plate without a scraper,easier removal of printed models from resin build surfaces |
Flat and durableBIQU resin steel plate is made of spring steel imported from the United States, with good flatness and durability; soft magnetic stickers have strong magnetic force |
Strong magnetic adsorptionThe surface of the resin steel plate is treated with special wire drawing, which has stronger adsorption force, and comes with high-viscosity glue, which is not easy to fall off |
|
|
|
---|---|---|
First stepPlease clean the surface of the steel plate before the first printing, so as not to interfere with the printing surface stains, do not use chemicals other than alcohol for cleaning |
Second stepMake sure the platform is clean and dry, slowly peel off the sticker on the back of the steel plate and stick it to the platform |
Third stepWhen pasting the soft magnetic surface, it must be closely attached to avoid leaving gaps. Please flatten it before printing to avoid scratching the surface by the nozzle |
WARM TIP: Before installation, please make sure that the platform is clean and dry, and then paste the soft magnetic surface, which must be tightly attached. If it is not tightly attached, it will cause the resin to soak into the back glue of the soft magnetic surface, which will result in loss of adhesion and failure to adhere tightly. Please also print after 24 hours of installation interval