Feature
●DURABLE STEEL CONSTRUCTION - Bike rack constructed by heavy duty tubular steel with black rust resistant powder coating, making floor bike stand more stable and for years using
●DUAL PURPOSES - 2 bikes can be stored in the same or alternate directions, depending on your space. 2 bike stand easily store bikes, no need other tool, just roll the bike into the rack and walk away
●FIT MOST TIRES - Two bike stand have a universal design, suitable for most kind of bicycle tires, maximum for tire size 26” and width 2.5”, excludes commuter bikes or bike with larger or wider tires
●EASY TO INSTALL - Attach the U pipes to the base first, attach the bent pipes to the U pipes,then attach the bent pipes to the base. You may assemble the bike floor rack in minutes by yourself
●CONVENIENT TO STORE - The product provides two shapes of stand, so you can store 2 bikes. Also you can store the bikes anywhere in your home,such as your living room, bedroom or garage
Description
OneTwoFit 2 bike floor stand
With the OneTwoFit 2 bike floor stand you can safely and securely store two bikes on the floor so they won’t tip over and scratch your car or harm other belongings.
The OneTwoFit 2 bike floor stand is designed so it can be assembled to hold bikes in the same direction or alternate directions, depending on your space.
The Floor Bike Stand firmly cradles your bike’s tires?holding the tire in the front, underneath, and on the side?to keep it from falling over.
Installation Steps
|
|
|
|
|
|---|---|---|---|
|
1-Screw the two Tubular Legs(2)to the Square Tube(1). To do this, use the hexagonal screws(6)and Curved Washers(7) supplied. |
2-Insert two of the Upright Tubes(4)into one of Tubular Legs(2)and secure these with two long metal screw(8) Then connect a Wheel Support(3)into the the opposite Tubular Leg (2 ) and secure these with two long metal screws(8) Use the long metal screws(8)to connect the Wheel Support (3) to the Upright Tubes (4) Repeat assembly above for the other half of the bike stand. |
3-Connect the Wheel Supports(3)using the cross-piece(5)and two long screws(8). |
4-Assembly is same as Option 1, but reverse direction of the second set of Upright Tubes and Wheel Support. |
