Feature
●Compatible with Canon EOS R7, EOS R8, EOS R10, EOS R100, EOS R50, EOS 90D, EOS R3, EOS R, EOS RP, EOS R5, EOS R5 C, EOS R6, EOS R6 Mark II, 200D, 200D II, 250D, 6D Mark II, 77D, 800D, 850D, EOS M6 Mark II, M50, M50 Mark II, M200, PowerShot G5X Mark II, G7X Mark III, SX70 HS, PowerShot V10, Rebel SL2, Rebel SL3, Rebel T7i, Rebel T8i
●Pairing the remote controller with a compatible with Canon digital camera enables the following operations to be performed wirelessly (with an operating distance of approx. 10 m/32.8 ft. in any direction). Please notice that when you pair it pls Make sure SET YOUR CAMERA DRIVE MODE TO REMOTE MODE
●Easy for shooting still photos and movies. Focusing with AF and support immediate release and 2-sec delay release. It requires no line of sight to the camera., you can use the remote to control the camera in any direction
●Zooming (when using the Power Zoom Adapter). Compatible with the PZ-E1 power zoom adapter for remotely adjusting zoom position and movement of the EF-S 18-135mm f/3.5-5.6 IS USM lens
●Mini size, small and easy to carry. Parcel includes: BR-E1 Remote x 1, CR2032 Battery (Inside the product) x 1, Strap x 1.
[Compatible with Nikon Cameras]
[Compatible with Canon Cameras]
Description
(1-1) Set the camera to the pairing standby mode
Select [Pairing] from the menu screen of the camera. For details, please refer to the camera instruction manual.
(1-2) Connect the remote controller to the camera
Press and hold the (W) button and (T) button on the remote controller simultaneously for three seconds or more.
The indicator lamp blinks, and pairing starts.
The indicator lamp lights up when pairing is complete. The remote controller is registered in the camera and a message is displayed on the LCD monitor.
If pairing fails, the lamp blinks rapidly. In such a case, press and hold the (W) button and (T) button again.
(2-1) Shooting still photos
1, Set up the camera for remote control shooting.
Set the camera for still photo shooting.
Set the drive mode of the camera to remote control.
2, Select the release method.
Set the release timing/movie shooting switch on the remote controller to the immediate release or 2 sec. delay release position.
(2-2) Take a picture
When you press the release button on the remote controller, the camera automatically focuses (AF), and takes a picture when focus is achieved.
The indicator lamp lights up when the focus is achieved with AF.
Pictures cannot be taken unless the focus is achieved with AF. The indicator lamp on the remote controller blinks rapidly.
When focusing manually, the indicator lamp lights up when the picture is taken.
(3-1) Shooting movies
1, Set up the camera for remote control shooting.
Set the camera for movie shooting.
Set (Remote control) to (Enable) from the menu screen of the camera.
2, Set the switch to movie.
Set the release timing/movie shooting switch on the remote controller to the movie position.
(3-2) Shoot the movie.
When you press the release button on the remote controller, the indicator lamp lights up and movie shooting starts.
When you press the button again, the indicator lamp blinks and movie shooting stops.
(4-1) Operating the power zoom adapter
1, Prepare the power zoom adapter.
Attach the power zoom adapter to the lens, then attach the lens to the camera.
Set the zoom mode switch of the power zoom adapter to the (PZ) position.
2,Set up the camera for remote control shooting.
Set the drive mode of the camera to remote control.
3, Press the power zoom button.
Press the (W) button to zoom to the wide-angle side or the (T) button to zoom to the telephoto side.
(4-2) Note (sold separately)
The power zoom adapter is a lens accessory (sold separately). For information on how to attach to the lens and operate the power zoom adapter, refer to its Instruction Manual.
|
|
|
|
|---|---|---|
|
|
|
|
