Recommend to use isolated/ individual power supply. Sharing power supply with other pedals may cause unexpected noise.
The level and tone of the delay and reverb can be modified
as well as the timing and feedback of the delay or the decay
and pre-delay of the reverb. This lets you set the delay or
reverb effect of each set to maximum volume or completely
off, allowing you to only use either the delay or reverb effect.
3 Pairs of Delay+Reverb Effects
|
|
|
|
---|---|---|---|
Choose Effects ModesToggle the switch to choose the 3 pairs of delay+reverb effects: 1. Reverse Delay+Swell Reverb; 2. Analog Echo Delay+Mod Reverb; 3. Analog Delay+Shimmer Reverb |
Delay ControlsLEVEL: Volume leve of delay effect; TIME: Delay time of delay effect; TONE: Tone color of the delay effect; FEEDBACK: Feedback of delay effect |
Reverb ControlsLEVEL: Volume of reverb effect; DECAY: Decay time of reverb effect; TONE: Tone color of reverb effect; PRE-DELAY: Pre-delay time. |
Optional RoutingWhether you want basic mono or true stereo, you will get it from this pedal. Digital and true bypass circuit design reduces your signal loss. |
|
|
|
---|---|---|
Easy to UseThe delay and reverb are time-based effects. The Level, Time, Tone, Feedback controls of Delay; and the Mix, Decay, Tone, Pre-delay controls of Reverb are all knob-based, and separated, turn one of them to 0 will get another individual reverb/delay effect. |
Tap TempoThe Tap Tempo switch can be used as named or you can hold it down to access the “freeze” effect to stop time and enjoy your ambient creation. The built-in trail function also lets you set your effects to fade out naturally. |
Trial OnTrail On will allow the effect to fade out naturally when it is switched off during playing. Power on the pedal, press and hold the Bypass switch to turn on/off the Trail function. When the Trail is on, the LED of Bypass switch will turn blue and blink after pressing. |
Input | 2*1/4"mono jack(Impedance value: 4.7M ohms) |
Output | 2*1/4"mono jack (Impedance value: 100 ohms) |
Power Supply | 9V DC center negative (Please do not use power supply over 9V orincorrect polarity) |
CurrentDraw | 300mA |
Dimension | 3.35x4.73x1.30 IN |
Weight | 0.81 LB |
Package Included | 1 x FS22 Ekoverb Pedal,1 x Safety Instruction Card, 1 x Quick Guide, 1 x Sticker |
We started FLAMMA to create the latest music technology to inspire our fellow musicians across the globe.
We believe that true creativity and collaboration cannot always wait for an unlimited gear budget. With this in mind, Flamma has developed a series of affordable, compact, and easy to use products that allow beginners and pros to find their perfect tone quickly and conveniently.